The application range of diodes is very wide. As long as diodes have unidirectional conductivity, they can be used for rectification, limiting, protection, detection, clamping, and switching circuits. The following mainly introduces the applications of diodes in several aspects.
Categories：Product knowledge Date：2024-11-25 Hits：446 View »
A P1N1P2N2 four layer three terminal device based on silicon single crystal, created in 1957. Due to its characteristics similar to vacuum thyristors, it is internationally known as silicon crystal thyristors, abbreviated as thyristors.
Categories：Product knowledge Date：2024-11-25 Hits：470 View »
The quality of field-effect transistors can be easily judged using a multimeter The method is to use a multimeter to measure the resistance value between the electrodes of the field-effect transistor, and then compare it with the resistance value indicated in the manual.
Categories：Product knowledge Date：2024-11-25 Hits：379 View »
Under normal circumstances, there is only a very small current in a reverse biased PN junction. This leakage current remains constant until the reverse voltage exceeds a specific value, after which the PN junction suddenly begins to conduct with a large current.
Categories：Product knowledge Date：2024-11-23 Hits：837 View »
Zener diode (also known as a Zener diode) is a surface junction silicon semiconductor diode manufactured using a special process.
Categories：Product knowledge Date：2024-11-23 Hits：398 View »
For the safe use of field-effect transistors, the maximum dissipation power, maximum drain source voltage, maximum gate source voltage, and maximum current of the transistor should not be exceeded in the design of the circuit.
Categories：Product knowledge Date：2024-11-23 Hits：629 View »
BAS20 SOT-23 YuFeng Microelectronics, original manufacturer of diodes, high-voltage diodes, surface mount diodes, fast recovery diodes, Schottky diodes, low voltage drop Schottky diodes, field-effect transistors, MOSFETs, MOSFET manufacturers, MOSFET production, fast recovery bridge stack, inverter rectifier bridge, rectifier bridge, ESD electrostatic tube, TSS solid-state discharge tube, TVS diode - YuFeng Microelectronics
Categories：Product Subsitution Date：2024-11-19 Hits：365 View »
For the safe use of field-effect transistors, the maximum dissipation power, maximum drain source voltage, maximum gate source voltage, and maximum current of the transistor should not be exceeded in the design of the circuit.
Categories：Product knowledge Date：2024-11-19 Hits：433 View »
1. Determine gate G, 2. Determine source S and drain D, 3. Measure drain source on state resistance RDS (on), 4. Check transconductance
Categories：Product knowledge Date：2024-11-19 Hits：441 View »
1. Power supply circuit; 2. Amplification circuit debugging; 3. Machine tone tuning; 4. The heat dissipation of the machine and the fixation of the power pipe
Categories：Product knowledge Date：2024-11-19 Hits：459 View »
